Difference between revisions of "FAQ"

From VyOS Wiki
Jump to: navigation, search
(clean up extra help text about command shorthand)
(Can I install on a CompactFlash?)
Line 45: Line 45:
 
Basically yes. try it!
 
Basically yes. try it!
  
== Can I install on a CompactFlash? ==
+
== Can I install on CompactFlash or USB flash media? ==
 
You can, but you should reduce writing in this case (redirect logs to a remote syslog server etc.). It is better to use enterprise grade SLC cards rather than consumer grade.
 
You can, but you should reduce writing in this case (redirect logs to a remote syslog server etc.). It is better to use enterprise grade SLC cards rather than consumer grade.
  

Revision as of 16:37, 13 April 2015

Contents

General Questions

What is VyOS?

VyOS is a routing/firewall/VPN platform , forked from Vyatta, based on Debian GNU/Linux that runs on x86 hardware and many virtual machine hypervisors.

Should I try it?

It depends. If you are a network engineer/administrator or want to become one, you should. VyOS is more like IOS, JunOS and other enterprise platforms, not like SOHO appliances (D-Link, Linksys etc.). You need to understand what you are doing to configure it.

What version should I install?

The latest one. Newer versions are always better than older.

How often are new versions released?

The first official version was released on December 22nd 2013. We ask your involvement by testing our nightly builds and report any problems you experience.

What functions does VyOS lack?

There are some. For instance it lacks

  • MPLS,
  • PBR (can be done with a trick),
  • WebVPN,
  • PPTP and L2TP clients,
  • IPv6 flow accounting.

Most of the currently lacking features are to be implemented in future releases.

Does VyOS support other hardware platorms (MIPS, ARM etc.) or will it support them in the future?

It does not. One of project goals is to make it work on widely used hardware.

Installation

What hardware requirements does VyOS have?

Hardware requirements strongly depend on purpose your appliance is used for. For small branch offices Atom/C3 CPU and 256-384M RAM should be enough; for edge routers, large VPN concentrators and other high loaded appliances you should consider powerful servers.

How much disk space do I need?

At least 2 GB. More space is recomended to be able to upgrade your installation via image (see questions below).

How do I upgrade my installation?

Preferred way is to use image-based upgrade. Find the latest image and type command "add system image <image URL>". You may download the image to your appliance and specify path to file as the argument, or specify a remote URL.

Do not use 'full-upgrade -k', it may ruin your setup irrecoverable.

Can I install VyOS on an embedded platform?

Basically yes. try it!

Can I install on CompactFlash or USB flash media?

You can, but you should reduce writing in this case (redirect logs to a remote syslog server etc.). It is better to use enterprise grade SLC cards rather than consumer grade.

Avoid using USB sticks in production, they are not intended for intensive usage and often fail.

What hypervisors can I use?

VMWare and XenServer are officially supported and appliance templates are provided for them. If you want to install on a Xen VM, use livecd-virt, it had Xen-aware kernel.

KVM and VirtualBox are known to work without troubles.

There are no reports about other hypervisors, but in theory they also should work.

Usage

How do I install debian packages?

First configure repositories. The Hydrogen release will be based on Debian Squeeze so:

set system package repository squeeze components 'main contrib non-free'
set system package repository squeeze distribution 'squeeze'
set system package repository squeeze url 'http://mirrors.kernel.org/debian'

Squeeze is not supported anymore, however Helium has some packages from Squeeze Long Term Support so:

set system package repository squeeze-lts components 'main contrib non-free'
set system package repository squeeze-lts distribution 'squeeze-lts'
set system package repository squeeze-lts url 'http://mirrors.kernel.org/debian'

In case you need more modern software or software that standard isn't available in squeeze, add

set system package repository squeeze-backports components main
set system package repository squeeze-backports distribution squeeze-backports
set system package repository squeeze-backports url 'http://backports.debian.org/debian-backports'

Then do "sudo apt-get update" and you can install packages with "sudo apt-get install xxxxxxx" as usual.

Configuration

How do I enter configuration mode?

configure

Commands accept abbreviations wherever they are unique, so in this case you can type:

conf

How do list the current config?

show

Once in configure, can I use commands that are normally available outside config mode ?

add "run" in front of the command, eg: run show interfaces

Can I see a history of commands given previously ?

history

How do I apply my changes?

commit

I am afraid my changes may break connectivity or make system inaccessible in other way. What should I do?

commit-confirm <MINUTES>

If everything is ok, issue

confirm

If you do not issue "confirm" command in given MINUTES (default is 10), your router will reboot and rollback to previous configuration.

I changed configuration and then changed my mind about commiting them. What can I do?

discard

I added a user with "useradd"/edited a config in /etc and everything is lost after reboot!

Do not do this. Backend configuration files are created by vyatta code at config loading or commit. All configuration changes must be done with native CLI ("set" commands).

If you do not have in depth understanding of VyOS code, it is better to forget it has Linux inside.

Is it possible to make vyatta show all the settings, line by line? So it is easy to use copy and paste ?

run the command "show configuration commands"

How do I enable web GUI?

There isn't one (yet) There are some initiatives like vyBuddy by Cartman. Might get integrated in a later version.

Firewall

Is any traffic filtering enabled by default?

No.

Is there a way to filter traffic originated by router itself?

Per-interface firewall for local only control inbound connectivity. If you use zone-policy firewall, you can restrict in or outbound traffic from the router.

I created a firewall instance, but it does not filter anything.

You should apply it to an interface to make it work.

If I have firewall enabled, is traffic described in NAT rules automatically enabled?

No, it is not. If you have both firewall and NAT, you should have both filtering rule to allow traffic and NAT rule to do translation.

Troubleshooting

How do I view logs?

Use operational command "monitor log" to view all log messages. You also may use "show log tail" comand to monitor latest messages in real time.

Other questions

How do I shot web?

We dunno, lol.