Up (command)

From VyOS Wiki
Revision as of 02:26, 28 March 2017 by Cbrjack (talk | contribs) (Page creation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The `up` command allows you to navigate one level higher in the configuration tree. To get to the top, you can either use the `up` command repeatedly or simply use the `top` command. To navigate down in the tree, use the `edit` command.

Syntax

[edit interfaces ethernet eth0]
vyos@vyos# up
[edit interfaces]
vyos@vyos#

Examples

[edit interfaces ethernet eth0 vif 222 ip]
vyos@vyos# up
[edit interfaces ethernet eth0 vif 222]
vyos@vyos# up
[edit interfaces ethernet eth0]
vyos@vyos# up
[edit interfaces]
vyos@vyos# up
[edit]
vyos@vyos#

Command tree