Monitor bandwidth-test (command)

From VyOS Wiki
Jump to: navigation, search

The "monitor bandwidth-test" command is used to run iperf. If iperf is not installed, an error will be returned:

vyos@vyos:~$ monitor bandwidth-test accept

  Invalid command: [iperf]

To install iperf, add the appropriate APT repository and install the iperf package. Once installed, the command will work.

Syntax

To start the iperf server:

vyos@vyos:~$ monitor bandwidth-test accept

To start the iperf client:

vyos@vyos:~$ monitor bandwidth-test initiate <server IP>